Add Snag List Items to a Drawing (Android)

Objective

To add a snag list item to a drawing in the Drawings tool using the Procore app on an Android mobile device.

Things to Consider

• Required User Permissions:
  • To add snag list items to a drawing: 
    • 'Read Only' permission or higher on the project's Drawings tool.
      AND
    • 'Standard' or 'Admin' on the project's Snag List tool.
      Note: While 'Standard' level users can create snag list items, they cannot assign a snag item unless they have been granted special permission to act as the Snag Item Manager. 
  • To publish snag list item markups on a drawing:
    • 'Standard' or 'Admin' on the project's Drawings tool. See What is the difference between personal and published drawing markups?

• This asset/item can be viewed or edited in offline mode provided that the asset/item was previously viewed and cached on your mobile device.

Steps

1. Navigate to the project's Drawings tool using the Procore app on an Android mobile device.
2. Search and filter for the drawing to which you would like to add a snag list item.
3. Tap the drawing.
4. Tap the snag pin markup tool in the markup toolbar.
5. Tap the area of the drawing that you would like the snag list item to reference.
6. After the pin has been dropped, you will be prompted to either add an existing snag list item or you can add a new snag list item.
   
   • Add a new snag list item:
     1. Click the + in the bottom right of the Snag List box. 
     2. See Create a Snag List Item (Android).
   • Add an existing snag list  item:
     1. Filter the snag list log by location.
     2. Tap the snag list item you would like to add.
7. You will briefly see "New PL" in the pin tag, this means your new pin is syncing with Procore.
   Note: Gray snag pin icons denote a closed snag list item. Red snag pin items denote an open snag list item.
8. Once the snag list item is complete, the tag will display the number of the item (e.g. "PL1500").

See Also

• Create a Snag List Item (Android)