View Models (Android)
Objective
To view models that exist in a project's Models tool using an Android mobile device.
Things to Consider
- Required User Permissions:
- 'Read Only' or 'Admin' permissions to the Models tool.
- Additional Information:
- If you want to view models in offline mode, they will need to be downloaded in the app first by tapping 'Download' on each model. See Download or Remove Models from a Mobile Device (Android).
Prerequisites
- At least one model must have been published to the Procore project. See Publish a Model to Procore.
- You must be using a supported Android device with at least 1GB of free storage. For information on device requirements, see Android Requirements and What type of device is recommended for viewing models in the Models tool?
Steps
- Navigate to the Models tool using the Procore app on an Android mobile device.
- Tap the model you want to view.
Note: If the model is not currently downloaded to your device, tap Download. - View the model. The following functions are available:
To Navigate Around the Model
- Hand Gestures: Use basic hand gestures on your device's screen to navigate around the model.
- Pinch or spread to zoom in or out.
- Drag in any direction to move around the model.
- Drag two fingers left or right to move horizontally.
- Drag two fingers up or down to move vertically.
- Press or hold an area of the 2D drawing to move to that location.
Note: Tap once to expand the 2D drawing.
- Joysticks: Interact with the three joystick controls for more precise control of your viewing perspective.
Note: Tap Settings to turn the joysticks on or off using the toggle switch.- Walk: Drag and hold the joystick to the left or right to adjust your view horizontally. Drag up or down to move vertically.
- Up/Down: Drag the joystick up or down to more vertically.
- Look: Drag the joystick in any direction to navigate around the model.
- Walk: Drag and hold the joystick to the left or right to adjust your view horizontally. Drag up or down to move vertically.
To Return to a View
- Tap Home to return to the Home Viewpoint.
- Tap Undo to return to the previous state.
Note: This will remember all previous settings, including hide/show and camera location.
To Adjust Settings
- Tap Settings if you want to change the viewing settings for the model.
- Adjust settings by tapping a toggle ON or OFF as necessary.
To Adjust Views
- If viewpoints are available, tap Views to open a specific section within the model.
Note: Viewpoints created in Navisworks® can be imported into the mobile viewer when creating or editing a model from the Procore plugin. See Publish a Model to Procore.
To Show or Hide Objects
- Tap Objects if you want to show or hide objects.
- Under Model Files, tap the toggle ON or OFF to show or hide objects.
- You can also hide specific objects while viewing the model. Tap on an object and choose from the following:
- Hide: Hide only the selected object.
- Similar: Hide the object and all similar objects.
To View Properties for an Object
- Tap the object you want to view information for.
- Tap the Info icon.
- A Properties window shows the object name and properties.
To Measure Distances
- Tap Measure.
- Tap the two objects you want to measure between.
- Procore automatically calculates the shortest distance between objects. If the objects have more than one distance between them, multiple measurements will be shown.
Note: If you are measuring complex objects, the calculation can take some time. - Optional: To view the measurements and objects from different perspectives, drag your finger on the screen to orbit around.
- If you want to measure other objects, tap Restart.
- When you are done measuring objects, tap Done.