Skip to main content
Procore

Enable or Disable Drawing Areas

Objective

To enable Drawing Areas for a project so users can add and create different drawing areas to categorise drawings.

Things to Consider

  • Required User Permissions:
    • 'Admin' on the Drawings tool.
  • Additional Information:
    • You cannot disable drawing areas if there is more than one drawing area in the Drawings tool. To disable drawing areas, first delete all drawing areas until you have only one and then disable the setting by following the steps in the Disable Drawing Areas section.

Steps

Enable Drawing Areas

  1. Navigate to the project's Drawings tool.
  2. Click the Configure Settings icons-settings-gear.png icon.
  3. Mark the checkbox next to 'Enable Drawing by Area.'
  4. Click Update.

Disable Drawing Areas

Important! You cannot disable drawing areas if there is more than one drawing area in the Drawings tool. To disable drawing areas, first delete all drawing areas until you have only one and then disable the setting by following the steps below. 

  1. Navigate to the project's Drawings tool.
  2. Click the Configure Settings icons-settings-gear.png icon.
  3. Unmark the checkbox next to 'Enable Drawing by Area.'
  4. Click Update.